SEMA 2014: Chevy Performance Highlights the Gen V LT1 Crate Engine

SEMA 2014: Chevy Performance Highlights the Gen V LT1 Crate Engine

Paul Huizenga
November 14, 2014

Over the past few years, Chevrolet Performance (nee General Motors Performance Parts) has found a lot of market success with their LS crate engine program. They’ve offered everything from mild 5.3 truck engines all the way up through the 638 horsepower LS9 from the C6 Corvette ZR1, so it’s not surprising that they’ve almost immediately made the new Gen V LT1 engine that powers the new Corvette Stingray available as a crate engine, too.

Image/s missing.

LT1 Specifications

Displacement: 376 Cubic Inches (6.2L)

Bore x Stroke: 4.065 x 3.622 (103.25 x 92mm)

Crankshaft: Forged Steel

Connecting Rods: Forged Powdered Metal

Pistons: Hypereutectic Aluminum

Compression Ratio: 11.5:1

Valve Size: 2.165 intake, 1.590 exhaust

Valve Lift: 0.561 intake, 0.531 exhaust

Camshaft Duration: 242 degrees intake, 244 exhaust

Rocker Arm Ratio: 1.81:1

Max Recommended RPM: 6,600
Rated at 460 horsepower, the LT1 is available in both wet sump (PN 19328728, MSRP $11,000.00, $8,898.88 at Pace Performance) and dry sump (PN 19329997, MSRP $11,250.00, $9,189.88 at Pace Performance) versions.

The engine electronics (PN 19303137, $1,898.88 at Pace Performance) are set up to properly control the variable valve timing system, though the crate engine package doesn’t implement the Corvette’s Active Fuel Management cylinder deactivation function.

In addition to bellhousings to mate the LT1 to the manual gearbox of your choice, Chevy Performance will also be rolling out an electronically-controlled four-speed automatic specifically set up for this crate engine (PN 19329645, $2,198.88 at Pace Performance.)

IMG_0740SEMAWhile we were visiting with Chevy Performance, we also got a look at the 2015 COPO – once again, just 69 cars will be made for this model year, and with this being the last hurrah for the 5th gen Camaro, we expect these cars to be hot commodities among collectors. That’s not to say they won’t see the racetrack duty they were built for, though; Chevy has done a pretty good job of vetting potential buyers to keep speculation at a minimum.

Chevy Performance has also been working hard to make Camaro parts available for those who want to 'upfit' their V6 or SS with parts from the 1LE, ZL1 or Z/28. This "flip car" was being use to show different suspension and driveline components available through the Chevy Performance catalog.
Chevy Performance has also been working hard to make factory Camaro components accessible for those who want to ‘upfit’ their V6 or SS with parts from the 1LE, ZL1 or Z/28. This “flip car” was being use to show different suspension, aero, and driveline pieces available through the Chevy Performance catalog.