New from BMR – 1.25-inch handling lowering springs for fourth-generation F-bodies. These springs are made from chrome silicon high-tensile wire, and are cold wound on a CNC coiling machine. They’ll give your ride better handling and a more aggressive look, too. See more details below.
Official Release:
Increase the handling capabilities and add an aggressive look to your Fourth Gen GM F-Body with Handling Lowering Springs from BMR Suspension. Manufactured from chrome silicon high-tensile spring wire, these springs are cold wound on a CNC coiling machine that can adjust the spring diameter in real time to ensure that every spring is exactly the same. These springs will drop your 1993-2002 F-Body approximately 1.25-inches and feature fine-tuned spring rates (725 lb/in front and 210 lb/in rear), giving you dramatically improved handling and an aggressive look. The BMR Lowering Springs (SP090) provide higher spring rates to keep the body flat and level in the corners, while giving you a lower center of gravity. This makes it the perfect spring for any F-Body that regularly sees the track. BMR designed the SP090 springs for handling and street performance applications. BMR also offers front (SP091) and rear (SP092) kits. Like all BMR lowering springs, the SP090 has a LIFETIME guarantee against spring sag. Available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!
Features:
- Made from chrome silicon high-tensile spring wire
- Cold wound on a CNC coiling machine
- Better handling and a more aggressive look
You might also like
Corvette Racing Dominates IMSA With Championship Sweep
Corvette Racing swept the IMSA GTD PRO season, taking Manufacturers, Drivers, and Teams Championships with the Corvette Z06 GT3.R.
