Do your pesky tires keep breaking loose on the nitrous hit? Nitrous Express (NX) has the perfect solution for you if they do. The Nitrous Express Maximizer EZ Progressive Nitrous Controller works by pulsing your fuel and nitrous solenoids to let the nitrous smoothly ramp up increasing traction and less strain and wear on the drivetrain. So if you are fighting traction and need an edge on the competition then the plug and play NX EZ Maximizer is a must have.

The progression ramp automatically starts at 20-percent and ends at 100-percent when you are Wide Open Throttle (WOT). Ramp time is adjustable from 0 to 4.5-seconds via a simple twist of the rotary knob. The lower the timing ramp is, the faster the nitrous kicks on. You will have to adjust it accordingly without introducing tire spin for the best et. If tire spin is noticed, increase the ramp time to slow down the ramp to full power. It’s that easy.

The Maximizer EZ is capable of powering nitrous and fuel solenoids with a total amp draw up to 40 amps maximum. But be sure and contact the nitrous manufacturer of your system to make sure the solenoids draw less than 40 amps.

Designed to replace the relay on NX nitrous systems, the Maximizer EZ is 100-percent plug and play so all you have to do is unplug the relay and plug in the progressive unit. If your nitrous system does not have a standard NX relay harness, use the included NX relay harness to complete the installation.

At $129.99 the Maximizer EZ offers a lot of bang for the buck and its made right here in the USA with its durable and sleek design. The NX Maximizer EZ Progressive controller is a must-have for grudge and drag racers. Get out there and start hooking and booking with the NX Maximizer EZ. For more information on the NX Maximizer EZ Progressive controller and other products, visit www.nitrousexpress.com.