Our friends at BMR Suspension just gave us the heads up on two new packages they offer for the 5th-Gen Camaro owner looking to make waves at the dragstrip. There’s the 15-inch Wheel/Brake Conversion and the Drag Race Suspension Package, and we have all of the details on both for you below.
Official Release:
BMR 15” Wheel Brake Conversion for the 2010-2013 Camaro
Run 15” drag wheels on your Fifth Gen Camaro with a Brake Conversion Package from BMR Suspension. The OE brakes and suspension components are too large to fit inside a small diameter drag wheel and are much too heavy for use at the drag strip. The BMR Brake Conversion Package (BCP001) includes a pair of new modified GM rear spindles, Wilwood hats and 12” drag rotors, Wilwood 4-piston calipers, BMR caliper bracket, and all necessary braided brake lines and hardware. 
Additionally, BMR worked directly with Weld Racing to create an application-specific wheel for use with this kit. When used in conjunction with the BMR Drag Race Suspension Package (DRP007), the BMR Brake Conversion Package for 15” Wheels drops 74 pounds. BMR has taken all of the hard work out of this upgrade creating a simple bolt-on solution for the hardcore racing enthusiast. Installation time is 4-5 hours.
Features:
- Includes all of the necessary hardware
- Simple bolt-on solution for the hardcore racing enthusiast
- Gives you excellent stopping power when used with 15-inch drag wheels
Official: Release:
BMR Drag Race Suspension Package for the 2010-2013 Camaro
Reduce un-sprung weight, solidify the rear suspension, and increase drag strip launch consistency in your Fifth Gen Camaro with a Drag Race Suspension Package from BMR Suspension. Manufactured from lightweight chrome-moly and utilizing adjustable rod ends, these components are designed with the drag racer in mind. The BMR Drag Race Suspension Package (DRP007) includes adjustable chrome-moly lower control arms, adjustable trailing arms, a coil-over conversion kit, and a pair of Strange double adjustable coil-overs with Hyperco springs.
When used in conjunction with the BMR 15” Wheel Conversion Package (BCP001), you can expect the weight of your Camaro to drop 74 pounds. This package also allows the racer to use 15” Weld Racing rims when combined with part number BCP001. Installation time is 4-5 hours.
Features:
- Reduce un-sprung weight, solidify the rear suspension, and increase drag strip launch consistency
- Made from lightweight chrome-moly and utilizing adjustable rod ends, these components are designed with the drag racer in mind
- Includes adjustable chrome-moly lower control arms, adjustable trailing arms, a coil-over conversion kit, and a pair of Strange double adjustable coil-overs with Hyperco springs
You might also like
SEMA 2025: Milltek Shows Off the Wildest C8 We’ve Ever Seen
Milltek featured the wildest C8 we've ever seen, and the crown jewel is the three-tip, Zonda-like exhaust system.
