Leak Down Testing — How It Works And What It Tells You

Leak Down Testing — How It Works And What It Tells You

When checking the health of an engine, there are several tests you can perform. Some, like used oil analysis, can chemically analyze what’s in your oil to tell you what’s failing (or not failing). Other tests are mechanical, like the compression test and cylinder leak-down test. Today we’re going to be discussing the venerable leak down test, and not only explaining how it’s performed, but what it can tell you,

The premise of a leak-down test is simple. You fill one of your cylinders with compressed air and measure how much of it is leaking out of the cylinder. Sounds simple, right? Well, not quite THAT simple, as Moroso’s Scott Hall explains in the above video. First, is that you need a specific leak-down tester to perform the test.

Moroso’s leak-down tester (P/N: 89603) looks a little different from most of the other leak-down testers you’ll find on the market, and that’s by design. The stand-up case version of the tool is designed to be easier to use than a handheld gauge. It’s also designed to be easier to read, with a large 3.5-inch gauge face in the center of the tester. The Moroso unit is calibrated to with 0.5-percent accuracy in-house at Moroso, and can be recalibrated if there’s any issues.

What a leak down tester does, is compare the line pressure of an air source to the flowing pressure when the cylinder is pressurized. The air source is connected to the tester and then the tester attached to the spark plug hole of the cylinder you are testing. The pressure differential is displayed as a percentage, between 0 and 100. If your tester were to have dual gauges in PSI instead, you would calculate the leak-down percentage by comparing the readings from the two gauges.

The actual process for testing the engine is straightforward. The first step is to make sure the engine is at (or very near) top dead center on the compression stroke. This will ensure that both valves are closed and the cylinder is in it’s most airtight configuration. Then, you simply connect the leak-down tester, pressurize the tester with air, and take the reading.

Moroso leak down tester

Single-gauge leak-down testers will give you a reading directly in percent leakage.

However, there is more that can be gleaned than a simple leak-down percentage. You can check several points in the engine for air, to determine the leak path of the pressurized air. The first is the exhaust port. If you detect air from the exhaust port, you know your exhaust valve isn’t fully seated on the valve seat. The second is from a valve cover breather (or any breather connected to the crankcase). If you detect air coming from there, you know the leakage is occurring via the piston ring-cylinder wall interface. The third place to check is the intake, be it a carburetor or throttle body. If you can detect air leaking out of the intake system, you know that the intake valve is not seated properly.

The results of each test are cylinder-specific, so you’ll need to test each cylinder individually to get an entire picture of your engines health. Your acceptable leak-down percentages will vary with your specific gauge, but, like a compression tester, you want to see similar readings across each cylinder. Obviously if all the cylinders are showing 30-percent leakage, there’s probably an issue, but if you’re checking a healthy engine and all the cylinders are close, but reading 11 percent instead of the 9-percent-or-less the internet is telling you is acceptable, you’re more than likely OK.

Alternatively to the stand-up gauge, which can be pricey, this handheld version from Moroso (P/N: 89600) is a less-expensive alternative that works in a similar manner.

Article Sources

About the author

Greg Acosta

Greg has spent twenty years and counting in automotive publishing, with most of his work having a very technical focus. Always interested in how things work, he enjoys sharing his passion for automotive technology with the reader.
Read My Articles

Late Model LS Power in your inbox.

Build your own custom newsletter with the content you love from LSX Magazine, directly to your inbox, absolutely FREE!

Free WordPress Themes
LSX Magazine NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

LSX Magazine - The Late Model GM Magazine for Camaro

lsxmag

We'll send you the most interesting LSX Magazine articles, news, car features, and videos every week.

LSX Magazine - The Late Model GM Magazine for Camaro

LSX Magazine NEWSLETTER - SIGN UP FREE!

We will safeguard your e-mail and only send content you request.

LSX Magazine - The Late Model GM Magazine for Camaro

lsxmag

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...


chevyhardcore
Classic Chevy Magazine
dragzine
Drag Racing
enginelabs
Engine Tech

LSX Magazine - The Late Model GM Magazine for Camaro

Thank you for your subscription.

Subscribe to more FREE Online Magazines!

We think you might like...

  • chevyhardcore Classic Chevy Magazine
  • dragzine Drag Racing
  • enginelabs Engine Tech

LSX Magazine - The Late Model GM Magazine for Camaro

lsxmag

Thank you for your subscription.

Thank you for your subscription.

LSX Magazine - The Late Model GM Magazine for Camaro

Thank you for your subscription.

Thank you for your subscription.

Loading